Forced Excitation of Steel Beam Using Portable ShakerObjective: To obtain the vibration response of a 3 m long beam using a portable dynamic shaker. Apparatus Used: 1. Digital multimeter 2. Concrete blocks 3. Steel beam 4. PZT patch 5. Portable shaker 6. Amplifier 7. Function generator
Step-1: (a) Click on add button to bring concrete blocks.
Step-1: (b) Click on concrete block to place it on the position.
Step-1: (c) Click on another concrete block to place it on the position.
Step-1: (d) Click on add button to bring portable shaker.
Step-1: (e) Click on portable shaker to place it on the position.
Step-1: (f) Click on add button to bring steel beam.
Step-1: (g) Click on add button to bring epoxy.
Step-1: (h) Click on brush to apply epoxy on the steel beam.
Step-1: (i) Click on add button to bring PZT patch.
Step-1: (j) Click on PZT patch to fix it on the steel beam.
Step-1: (k) Click on epoxy to send it back.
Step-1: (l) Click on add button to bring wires.
Step-1: (m) Click on add button to bring soldering iron.
Step-1: (n) Click on black wire to place it on the PZT patch.
Step-1: (o) Click on red wire to place it on the PZT patch.
Step-1: (p) Click on PZT patch for zoom view.
Step-1: (q) Click on soldering iron for soldering.
Step-2: (a) Click on add button to bring digital multimeter.
Step-2: (b) Click on add button to bring amplifier.
Step-2: (c) Click on add button to bring function generator.
Step-2: (d) Click on yellow wire of amplifier to attach it with the function generator.
Step-2: (e) Click on red wire of amplifier to attach it with the portable shaker.
Step-2: (f) Click on black clip to attach wire with PZT wire.
Step-2: (g) Click on red clip to attach wire with PZT wire.
Step-2: (h) Switch on the power button of digital multimeter.
Step-2: (i) Switch on the power button of function generator.
Step-3: Click on download data button.
Time:
No. of samples:
Select first
Note:--Notice the highest peak in the graph and note it as the natural frequency.
Step-4: Calculate the natural frequency theoretically
(Refer manual of experiment in reference tab)
Compare the calculated theoretical frequency with the frequency obtained through
this experiment. Thankyou for performing the experiment
If you want to perform experiment in real trigger mode Click here |